E230
E230
The TCT E230 Series is a Two Flute Endmill for milling and flexible materials to serve your PCB fabrication needs.
Find a range of common sizes offered below. Custom diameters, flute lengths, and fishtail are available upon request.
| Diameter Range (d) | Flute Length (ℓ) | ||||
|---|---|---|---|---|---|
| Metric | Wire/Fractional | Dec. Inch | – | – | – |
| 0.40mm | 1/64″ | .0157″ | – | 2.0mm (0.079″) | – |
| 0.50mm | – | .0197″ | – | 3.0mm (0.188″) | – |
| 0.60mm | – | .0236″ | 3.0mm (0.188″) | 3.5mm (0.137″) | – |
| 0.70mm | – | .0276″ | 3.0mm (0.188″) | 4.0mm (0.157″) | – |
| 0.80mm | 1/32″ | .0315″ | 3.0mm (0.188″) | 4.0mm (0.157″) | 4.5mm (0.177″) |
| 1.00mm | .0394″ | 5.0mm (0.197″) | 6.0mm (0.236″) | 7.0mm (0.275″) | |
| 1.20mm | 3/64″ | .0472″ | 6.5mm (0.255″) | 7.0mm (0.275″) | – |
| 1.30mm | – | .0512″ | 6.5mm (0.255″) | 7.0mm (0.275″) | – |
| 1.50mm | – | .0591″ | 6.5mm (0.255″) | – | 8.0mm (0.314″) |
| 1.60mm | 1/16″ | .0630″ | 6.5mm (0.255″) | – | 8.0mm (0.314″) |
| 1.80mm | – | .0709″ | 6.5mm (0.255″) | – | 8.0mm (0.314″) |
| 2.00mm | – | .0787″ | 8.0mm (0.314″) | – | 10.0mm (0.394″) |
| 2.40mm | 3/32″ | .0945″ | 8.0mm (0.314″) | – | 10.0mm (0.394″) |
| 3.175mm | 1/8″ | .1250″ | 9.5mm (0.374″) | – | 12.0mm (0.472″) |
